Choose the finish first. If you want to approve the colour and coating from a finished sample, start with engineered herringbone flooring. If you want a stain mixed for the project, start with raw solid oak and include sanding and coating in the installation quote. Both constructions create a staggered zigzag; the scale changes with the board.
The engineered boards are 900 × 150 × 15 mm, with a 4 mm European oak surface over a multi-layer hardwood core. Compare Burnished Java, Latte Tan, Natural Oak, Satin Greige and Washed Sand. To judge the colour, hold a matte sample beside your cabinetry in daylight and under the lights you will use at night. To judge the pattern, tape out a 900 × 150 mm rectangle on the floor; a small colour sample alone cannot show the full repeat.
For solid oak, compare the 610 × 125 mm and 450 × 90 mm formats. Both are 18 mm thick, unfinished and tongue-and-groove. Choose 610 mm for a broader single herringbone; look at the 450 mm format for a tighter single, double herringbone or basket weave. The solid oak size pages show carton coverage for each board.
15/4 mm means 15 mm overall with a 4 mm oak wear layer. Carton coverage excludes a cutting allowance.
What affects a herringbone flooring quote?
A useful quote starts with the selected board, floor area and delivery location. For raw solid oak, allow for the chosen finishing work as well as laying and subfloor preparation. Ask your installer to confirm the cutting allowance before converting the final area into cartons.
If you are still choosing between finished and unfinished oak, ask for a sample of each. For a supply quote, use the link beside the finish or board size you prefer and include the floor area and delivery postcode. A photo or room plan can help you discuss the scale before choosing a format.
Ask for a quote or samples ↗
Herringbone flooring questions
Is herringbone flooring available in engineered and solid oak?
Yes. Choose 900 × 150 mm engineered oak in five matte finishes, or raw 18 mm solid oak in 610 × 125 mm and 450 × 90 mm boards. Compare the construction, finish and board size before ordering.
What is the difference between herringbone and chevron?
Herringbone uses rectangular boards arranged in a staggered zigzag. Chevron has angled ends that meet in a continuous V. See the comparison guide for board shapes and photographs.
Can I request a herringbone flooring sample in Melbourne?
Use our enquiry form to ask about physical samples or call 1300 003 988. Include the preferred construction, format and finish in your enquiry.